DAG1000/2000 Series FXS/FXO Voice Gateway User Manual
30
Dinstar Technologies Co., Ltd.
Configuration by FXO:
When the call from FXO interface, users can be enable or disabled FXO allocation
function. FXO configuration function includes: detect CID, Send original CID, Play hint to
FXO.
Detect CID
:
to enable caller ID detection for incoming calls. The gateway has two
modes: Before ring and after ring.
Before ring:
the FXO port will detect CID first, then ringing to the port. It takes about
few seconds to detect CID in generally.
After ring:
the FXO port will ringing to FXO port then start to detect CID
Send Original CID when Call from PSTN
From Mode when CID Is Available
Used to configure "From" Mode when Caller ID Is Available when call from PSTN
to VoIP. The SIP header should be matched with follow formats:
Display/CID: From: “Mike”<sip:[email protected]>;tag=51088abb
User ID/CID: From:”201”<sip:[email protected]>;tag=51088abb
CID/CID: From: Caller ID <sip: Caller
[email protected]>;tag=51088abb
CID/User ID: From:”Caller ID”<sip:[email protected]>;tag=51088abb
From Mode when Caller ID Is Unavailable
Used to configure "From" Mode when Caller ID Is Unavailable
Anonymous : From: <sip: Anonymous @host.com>;tag=51088abb
Display/User ID: From: “Mike”<sip: 201 @host.com>;tag=51088abb
Keep onhook until callee answered