DWG2000 GSM/CDMA/WCDMA User
Manual
28
Copyright @ 2015
seizure ratio(ASR), number of calls and number of failed calls.
Note: When the actual number of failed calls reaches the set number, frequencies will be switched or when the
actual answer-seizure ratio is less than the minimum answer-seizure ratio, frequencies will be switched.
Step 5.
Click the
button, and a prompt message indicating successful setting will pop up.
Step 6.
In the navigation tree, click
Mobile Configuration
BCCH
. You will see the following figure on the
upper interface. If there are some frequencies that are not useful, you can set them on the BCCH
Blacklist, and then those frequencies cannot be used by the mobile station.
Note: The BCCH Blacklist only works at random mode and advanced mode.
Step 7.
On the
Mobile Configuration
BCCH
interface, you can also set a refresh interval. For example,
if you set refresh interval as 5 seconds, frequencies will be refreshed every 5 seconds.
Step 8.
Click the
button on the interface.
4.8.8
Call Forwarding
Calls can be forwarded unconditionally or under certain conditions.
