DAG3000-112S VoIP Gateway User Manual
45
Password
Offhook Auto-Dial
To enter offhook auto-dial number
Auto-dial Delay time
How long auto-dialing will be delayed
Port Select
It specifies the policy for selecting a port for ringing in the port group
Ascending: the gateway always selects a port from the minimum number.
Cyclic ascending: the gateway always selects a port from a number next to the
number selected last time. If the maximum number was selected last time, the
next selected number is the minimum number. The sequence moves in cycles like
this.
Descending: the gateway always selects a port from the maximum number.
Cyclic descending: the gateway always selects a port from a number next to
the number selected last time. If the minimum number was selected last time,
the next selected number is the maximum number. The sequence moves in cycles
like this.
Group ring: all ports ring at the same time
Pickup UP on group
When one port rings, user can dial
‘*#’ to pick up the call
from other ports under
the same port group.
Port
Select ports for this port group
3.11.3
IP Trunk
A peer-to-peer VoIP call occurs when two VoIP phones communicate directly over IP network without
IP PBXs between them. IP trunk helps establish peer-to-peer call between gateway and VoIP phones.
IP trunk will be used in routing configuration.