DINSAFE MatiGard, Руководство пользователя

Страница: 40 / 42

40
Appendix II: FAQ
Symptoms Causes Remedies
Cannot receive alarm call
1.Didn’t arm the system;
2.Less than 30 seconds after arming.
3.Setup wrong phone number;
4.The two parts of door contact is installed
too far from each other.
5.Didn't activate PIR or other ac- cessories;
6.Didn’t pair correctly
1.Make arming;
2.Operate after 30 seconds;
3.Setup the number again according to the manual;
4.Adjust the installation place of door contact;
5.Activate PIR detector;
6. Pair again
The distance of remotely control
is too short and the indicator
light is not strong enough
1.The battery of remote controls got rusted;
2. Lowbattery 1.Clean the rust;
2. Replace the battery with a new one
Indicator light of door contact or
PIR detector is always on.
Low battery Replace the battery with a new one
Make alarm call very slowly Too many alarm contacts Set it again according to the operation manual
The control panel cannot receive
RF signals
Didn’t pair them correctly Please pair control panel with other accessories again