Dinolift 10196, Руководство по эксплуатации

Страница: 48 / 59

48
Operating instructions • DINO 105TL
7. MAINTENANCE SCHEDULE
DANGER
WARNING
CAUTION
NOTICE
In addition to the daily maintenance routines according to the maintenance schedule, every
operator is obliged to perform a site-specific worksite inspection.
C = Check (general/visual checking of condition).
I = Thorough Inspection. To be performed following the procedure, described in the separate
maintenance instructions.
M = Carry out lubrication, services, replacement of parts and repairs in accordance with this
point.
Always lubricate the lift and apply a protective grease film immediately after the washing.
The lift must be subjected to an extraordinary inspection always after an exceptional event.
An event is exceptional, for example, if the lift has been damaged so severely, that its
strength or operational safety may have been endangered. Consult the maintenance manual
for more detailed instructions.
DANGER
WARNING
CAUTION
NOTICE
Under demanding conditions where moist, corrosive substances or corrosive climate may
speed up the deterioration of the structures and induce malfunctions, the maintenance
intervals must be shortened, or the influence of corrosion and malfunctions must be reduced
by using appropriate protective agents.
Service Service interval Service person Instructed
A Daily Operator
operating
instructions
B
every month/100
hours*
Competent person who is familiar with the lift
maintenance
instructions
C
every 6 months/400
hours*
Competent person who is familiar with the lift
maintenance
instructions
D
every 12
months/800 hours*
Technical specialist, who is well familiar with the
structure and operation of the lift
maintenance
instructions
E When necessary
Technical specialist, who is well familiar with the
structure and operation of the lift
maintenance
instructions
* Service interval in months or operating hours, depending on whichever
comes first.