11
How to delete measurement
2.
Tap the trash bin icon on the toolbox to delete the
measurement. Note that the measurements on
captured images cannot be deleted.
Select the measurement object. The measurement
toolbox will display.
1.
DinoConnect 2 allows users to perform measurements on the live
preview or images captured with magnification recorded.
Measurement
How to do measurement
1.
Check the magnification has been entered correctly for
models without AMR.
4.
Repeat Step 3 until all points needed by the
measurement are specified.
5.
Tap again on the preview to complete the
measurement.
2.
Tap the measurement toolbox and select a
measurement tool. Each measurement consists of two
or three points.
3.
Tap to specify a point on the preview. Before the next
point is specified, the point position can be
fine-adjusted by sliding the finger anywhere on the
preview in the intended direction.
