6 English
Dino-Lite User manual
management bar.
Measurement tools – Many different measurement types can be
done with the measurement tools. The double flash icon gives you
access to the grid and ruler settings.
Notice:
The measurement and calibration feature is only
available for certain models. For the DinoEye models, it is
recommended to make calibrated measurements only. Please
contact a local sales representative for further information.
Line
Left click and drag to the desired length, and click
again to finish.
Continuous
line
Click and drag to form one section of distance, click
again to start another section. Continue until the
total desired distance is measured. Double click to
finish.
Point to line
Create a line to represent the base by clicking
once to start, drag, and then click again to set the
endpoint. Branch off from the base line to start
measuring the line that is 90 degrees from the base
line and a final click to finish the measurement.
Polygon
Click and drag to form the desired length, and click
again to start the next section. When finished,
double click to finish the polygon measurement.
Radius circle
Click and extend out to the desired radius.
