Dino lift Dino 180XT, Руководство по эксплуатации

Страница: 54 / 102

DINO 180XT
54
TESTING THE LOAD LIMITS
- Load the platform with exactly 120 kg (265 lbs) 100 mm (4 ") from the trail edge of
the platform bottom
- Operating from the lower control panel, move boom to horizontal position.
- Extend the telescope as far as possible.
- Measure the length of one part of the telescope arm.
The length should be 2450 ± 50 mm (96 ± 2 in)
- Make sure that the platform red "overload" warning light is lit.
- In case the first switch (RK4) should fail, overload is also monitored by 2:nd limit
switch (RK5)
- Disable RK4 by disconnecting lead 40 and using a jumper lead to connect leads 13
and 39 together (lower operating panel) for the duration of the test.
- Retract the boom and extend it again, measuring the extending part of the telescope.
The length should be 2900 ± 50 mm (114 ± 2 in)
- If the extending part is too long, adjust the limit switches and secure them by
applying a seal.
- Warning! Do not forget to make the limit switch RK4 functional by connecting
lead 40 back and by removing the jumper lead from terminal block.