DiniTech NRGKick Connect, Инструкция по эксплуатации

Страница: 7 / 24

Ver.: 1810-01 5
EN
1. Plug NRGkick Connect into the Schuko Socket, that is
within range of the WLAN signal and the NRGkick
charging unit.
2. Wait for NRGkick Connect to enter in setup mode which
is signaled by fast flashing of the LED.
3. Open the NRGkick App and follow the instructions.
5.2 Requirements for using NRGkick Connect
To use NRGkick Connect the following devices are required:
•
WLAN-Router
The WLAN router must be within range of NRGkick Connect.
Optionally, WLAN repeaters can be used.
•
NRGkick charging unit
Only NRGkick Version with Bluetooth is supported.
The charging unit must be within range of NRGkick Connect
(around 10 meters) *.
•
NRGkick App
To use and set up NRGkick Connect, a smartphone with iOS
or Android (at least iOS 8.0/Android 4.3) and the installed
NRGkick App is required. The NRGkick App can be
downloaded for free from the App Store or Play Store.
*walls, doors and windows can weaken the Bluetooth signal
5.3 NRGkick API
An API is available, more information can be found at
www.NRGkick.com .