Dini Argeo TPR, Руководство пользователя

Страница: 3 / 32

3
GENERAL SAFETY INFORMATION
-Read and keep the instructions which follow.
- Follow all warnings and instructions indicated on the printer.
- Before cleaning the printer, disconnect the power supply cable.
- Clean the printer with a damp cloth. Do not use liquid or spray products.
- Do not operate the printer near water.
- Pay attention that the external frame, the cover and the printer frame are made from polypropylene, so it’s better to keep
away from:
• ammonia
• hydrocarbon
• methanol • dichloromethane
• acetone • perchloretylene
• washing-up liquid • ethylene
• benzol • trichlorethylen
• dishwasher liquid • toluene
Do not use the printer on unstable surfaces that might cause it to fall and be seriously damaged.
Use the type of electrical power supply indicated on the printer label. If in doubt, contact your retailer.
Make sure the printer is placed in such a way as to avoid damage to its wiring.
Make sure that the maximum load absorbed by the printer does not exceed the approved Maximum load by the type of
cable used to supply.
Do not introduce foreign objects of any kind into the printer as this could cause a short circuit or damage parts that could
jeopardize printer functioning.
Do not spill liquids onto the printer.
Do not carry out technical operations on the printer, with the exception of the scheduled maintenance procedures
specifically indicated in the user manual.
Disconnect the printer from the electricity supply and have it repaired by a specialized technician when:
A. The feed connector has been damaged.
B. Liquid has seeped inside the printer.
C. The printer has been exposed to rain or water.
D. The printer is not functioning normally despite the fact that all instructions in the users manual have been followed.
E. The printer has been dropped and its outer casing damaged.
F. Printer performance is poor.
G. The printer is not functioning.