www.DingoTone.com
© 2011
V10
Plug it in and play!
Connect your
Limited Edition
HZD Boost
pedal like this:
1) Ensure the pedal is correctly powered.
2) Leave the pedal in bypass mode (LED off).
3) Set the input volume on the amp to the level you need.
4) Set the controls as shown below.
5) Turn on the amp and adjust the Boost and input volume of the amp until you get the crunch /
tone you want out of the amp
6) Adjust the High and Low controls to taste
Connect any other pedals you have after the
Limited Edition
HZD Boost
pedal. Note that
high levels of boost can cause pedals after the
Limited Edition
HZD Boost
to distort – if
this happens, please reduce the Boost control.
