DimSport F32 MYGENIUS, Руководство пользователя

Страница: 8 / 22

USER MANUAL
November 2017
Ver.2.06
Pag. 8/22
2.Protocol identification system – Brand/Model/Type
The MyGenius device is able to recognize the correct protocol through the Brand, Model, Type selection
performed by the client. The following chart will show you how to proceed for this specific situation
where you have to select the correct model and type of the vehicle you want to work on.
Connect the OBDII cable to MyGenius and to the vehicle diagnostic socket. On the device main menu
select WORK, the tool will show the vehicle brand therefore it is set up. Click SELECT button to
continue and to choose the correct model and type of the vehicle.
MyGenius has properly identified the correct serial protocol for
your car. Click OK and select WORK, depending on the protocol
the device will be able to perform the reading or only the
identification of the ECU software.
(2a) READING
(2b) IDENTIFICATION
ONLY
WARNING!
* if the model and type selected are correct but the device is unable to automatically identify the protocol
please read the SPECIAL MANUAL OPERATION 2s) on page 14.
** if you select either the wrong model or type please read the WRONG SELECTION instructions on
page 15.