Remote Operation
Operating Instructions
But-
ton
Display
Func-
tion
Description
A
On/
Standby
Press this button once to turn on the product. Press it again to turn off the product.
When turned on, you will hear a beep and the digital display will show the 'ON,' icon,
followed by displaying the current room temperature. The display will then turn off. The
main LED lights will activate. Be careful not to look directly into the LED's. Although
the mains lights operate immediately, it will take a further 45 seconds before the flame
effect starts.
B
Heat
Setting
Press this button once to activate the 'Low' heat setting. Press it again to activate
the 'High' heat setting. If you continue to press this button you will cycle through
the 'Low' and 'High' heat settings. You will heat 2 beeps for 'Low' heat setting and 3
beeps for 'High' heat setting.
C
-
Heat
Off
Press this button once to turn off the heat. You will hear 1 beep.
D
Room &
set point
temps
Display
temper-
atures
Press this button to display the current room temperature followed by the current set
point temperature.
F
Set Point
Temp
De-
crease
Set Point
Temper-
ature
Press this button to decrease the set point temperature. If the set point temperature
is below the room temperature, the heat function will not operate. The temperature
range is from 15-35°C.
G
Set Point
Temp
Increase
Set Point
Temper-
ature
Press this button to increase the set point temperature. If the set point temperature
is below the room temperature, the heat function will not operate. The temperature
range is from 15-35°C.
H
Increase
Fire Set-
ting
Press this button to increase the 'Fire' setting.
I
De-
crease
Fire
Setting
Press this button to decrease the 'Fire' setting.
13
