7
6.3.2 Cold air fan
Pressing button D causes the integrated fan with-
out heating action to be switched on. The cold air
mode is indicated by means of the green indicator
light D1.
The fan operating time can be set by pressing
button C once or several times.
The following time settings are available:
30 minutes (1/2h), 60 minutes (1h) or
120 minutes (2h), off.
1h
2h
1/2h
2
1
3
4
6
9
2
7
10
A1
B1
A
C
D
B
D1
6.4 Comfort Mode (thermostat-controlled fan)
In the comfort mode, also the fan heater – in addition to
the radiant heater - is controlled by the thermostat.
To activate the Comfort mode:
Unit must be switched on (power-on indicator light
A1 is illuminated)
Press button A for three seconds until indicator
light A1 is flashing.
To exit from the Comfort mode:
Press button A once more (indicator light A1 ex-
tinguishes, heater is off).
After the heater is switched on again (press but-
ton A once more) the appliance resumes normal
operation (as described under "6.1 On/Off But-
ton")
7. Overheat Protection
For your safety, the towel warmer/rapid heater is
equipped with an overheat protection each for the func-
tions "Radiant On” and "Fan heater On”.
If the heater becomes excessively hot, the appliance is
automatically switched off.
Resetting the overheat protection
After the cause of tripping the overheat protection has
been eliminated (e.g. air slots were covered), the appli-
ance can be restarted.
The "radiant heat" overheat protection will automatically
reset once the appliance has cooled down sufficiently.
The overheat protection for the integrated fan heater
must be reset manually by switching the heater off (ac-
tuate button A) and allowing the appliance to cool down.
Should the overheat protection trip repeatedly, please
consult your customer service agent.
8. Malfunctions
In the event that defects in your appliance result in mal-
functions, please contact your customer service agent.
Provide the service agent with a detailed description of
the malfunction.
For processing the service call, the product number (E-
number) and the manufacturing date code (FD-number)
of the appliance are required. These data can be found
on the rating plate (at the rear of the appliance).
Repairs and interventions in the appliance may only be
performed by a qualified electrician or the customer ser-
vice.
9. Cleaning the Appliance
Before the appliance can be cleaned it must be switched
off and have cooled down.
Wipe the outside of the heater with a soft, damp cloth
and then dry. Do not use scouring powder or furniture
polish for cleaning as these may damage the housing.
Dust that may have accumulated in the appliance can be
removed from the outside with a vacuum cleaner.
10. Technical Data
Rated capacity
1500 W
Radiant heating
700 W
Fan capacity
800 W
Voltage
230V~ 50 Hz
Protection type
IP 24, splashproof
Safety class
II, double insulated
Dimensions without rail
Dimensions with rail
440 x 1010 x 121 mm (W x H x D)
470 x 1010 x 267 mm (W x H x D)
Weight 13
kg
11. Warranty
Authorised dealers can provide information on the terms
and conditions of warranty. The warranty is not valid
without a sales receipt marked with the date of purchase.
Recycling
The appliance must not be disposed in the
normal household rubbish. Check with your
local authority or retailer for recycling advice
