Icon
Function
Description
A
Power
Press to turn unit Off or On.
• Unit Off
Press to turn everything Off. Press again to turn unit On with previous settings.
• Unit On
Press to turn unit On with previous settings.
-If the flame effect was On, the flame will turn on and the previous heat setting will
be activated (On or Off). Display will show current heater temperature setting and
after 2 sec displays the room temperature.
-[remote only] If the flame effect was Off, the previous heat setting will be
activated (On or Off).
-[panel only] If the flame effect was Off, the flame will turn on and the previous
heat setting will be activated (On or Off)
B
Heat
• Heat On
Press to turn heat On (indicated by 1 short beep). Display will show current heater
temperature setting and after 2 sec displays room temperature. Use the Temp icon
to change the heater temperature setting.
• Heat Off
Press to turn heat Off (indicated by 1 short beep).
NOTE:
After the heater is switched off, the fan will continue on for 60 seconds before turning
off.
C
Temp
Press multiple times to raise the heater temperature in 1
o
F (1
o
C) increments. Display
will show current temperature. Temperature range is 62
o
-78
o
F (17
o
-26
o
C).
This feature is active whenever the heat is enabled.
D
Flame Speed
Press multiple times to toggle through flame speeds (minimum, medium, maximum).
Display will show current speed number (F1, F2, F3 respectively).
E
Color Themes
Press multiple times to change the media and flame base colors. This feature is
active only when the flame effect is On. Display will show theme (t0, t1, t2, etc.)
XHD28L, XHD26L or XHD23L (Log Unit) themes:
• Theme t0 - no flame
• Theme t1 - Natural (flame base off)
• Theme t2 - Red Highlights (flame base red/orange)
• Theme t3 - Blue Highlights (flame base blue)
F
Brightness
Press to change the flame and logs brightness. Display will show b3, b1, b2
respectively.
• High
• Low
• Medium
G
Flame
Press to turn the flame effect On. Press again to turn the flame effect Off.
H
Timer
Press multiple times to change the sleep timer by 0.5 hr from 0.5 hr to 8 hr before
turning off. Press again, the remaining time on the timer displays.
User Modes:
Mode Name /Discription
Action (Actions cannot be input by remote control)
Change Celsius (
0
C) to
Fahrenheit (
0
F)
Press both Temp Button ( ) and flame speed( ) on the unit and hold until beep is
heard and display flashes. (To revert back to Celsius repeat this action)
Disable / Enable Heat
Options
Hold both Heat Button ( ) and Temp Button ( ), on the unit, for 2 seconds, when the
heater has been disabled the display will read “--” and beep. To enable heat repeat this
action.
Controls: See Fig. 2
EN
