Thermal Safety Cut-outs
The power supply to the heating elements will be interrupted if one or a combination of the following
abnormal events occur.
1 .
Air inlet or outlet grilles are obstructed,
2.
Internal ventilation is impaired due to build up of dust and fluff.
3.
Blower unit stalls.
Note :
If the cut-out operates, the fan may continue to run and the thermal cut-out may cycle the
heating elements on and off greatly impairing the performance of the heater. The heater must be
turned off immediately.
Procedure for resetting the cut-out;
A.
Disconnect the electricity supply to the appliance either by switching off at the Remote
Control switch panel or at the consumer unit.
B.
Determine what has caused the cut-out to operate and rectify.
( Note : This should only be undertaken by competent persons with experience of repairing
electrical appliances and in full knowledge of the possible hazards involved ).
C.
After a short time delay to allow the appliance to cool down, all that is required to return the
heater to normal operation is to switch the electricity supply back on.
Cleaning
External appearance can be maintained by wiping occasionally with a damp cloth ; for stain removal, a
weak soap solution can be applied, then wipe dry.
After Sales Service
Your Dimplex Air Curtain is guaranteed for one year from date of purchase. We undertake to
exchange or repair free of charge within this period any part found to be defective due to a
manufacturing fault. This guarantee in no way prejudices your rights under common law.
Should you require after sales service, please get in touch with the supplier through whom you
purchased the appliance, or your nearest service agent.
Please do not initially return a faulty appliance or part of an appliance to us as this may result in
transit damage and/or delay in providing service. Let us know your difficulty, quoting the model
number and series letter of the appliance. We will then take the appropriate action.
This product complies with the European Standard for Electromagnetic Compatibility (EMC) EN55014,
EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 89/336.
Glen Dimplex UK Limited UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)
Millbrook House
Grange Drive Customer Services: Tel. 0870 7270101
Hedge End
Fax. 0870 7270102
Southampton
Hampshire. SO30 2DF Republic of Ireland 01. 8424833
Tel:
+44
(0)191 490 1547
Fax:
+44
(0)191 477 5371
Email:
Website:
www.heattracing.co.uk
www.thorneanderrick.co.uk
