Dimplex Saletto LPP050E, Инструкция по эксплуатации

Страница: 13 / 28

The heater controls can be easily adjusted by using the six buttons on the User
Interface.
1
The Display Screen
shows the options available at each stage of adjustment.
2
Menu - displays the main options list;
-
Date/Time
- Set the date and time.
- Mode - Set the mode of operation.
-
Options
- Temperature units, daylight savings time, lock settings and
service information.
3
Back
returns to the previous programming stage.
4
The and buttons are used to navigate through the menus and alter setting
values. The and buttons are also used to adjust the required room temperature
on the main screen. The screen colour changes based on the temperature selected,
showing deep blue through to bright red.
5
Enter
is used within the menu options to confirm
settings
. On the main screen
pressing
Enter
will display the enabled features.
The timed periods during which the heater is providing heat are defined as
‘ Comfort On ’ (this is displayed at the bottom of the screen).
Outside of heating periods the heater will not deliver heat and these periods are
called ‘ Comfort Off ‘.
While constant heat modes are active, the mode of operation is displayed at the
bottom of the screen e.g. ‘
Manual
’.
6
The Advance button overrides the heating settings and changes the operational
state of the heater. If a timer mode is selected, pressing
Advance
will cause the
heater to remain on until the next Comfort Off period is due, or off until the next
Comfort On
period is due.
If the heater is in a continuous heat mode of operation, Advance can be used to
switch the appliance on and off.
Advance
is also used to enter Boost mode. Boost mode delivers heat for between
one and four hours if the appliance is in a Timer Mode.
If Runback is enabled and the appliance is in
Standby mode
, the
Advance
button
is used to enter a timed Runback heating period.
Control Functions
13