In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2012 Dimplex North America Limited
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
Warranty
Replacement Parts
The Manufacturer warrants the heating elements and components of the
enclosed product against any defect in material or workmanship for a period
of one year from the date of purchase. In full satisfaction of any claims
under this Warranty the Manufacturer will repair or replace without charge, in
its factory or in the field as it alone may decide, any parts which in its opinion
are defective.
The Manufacturer shall not be responsible for any transportation or shipping
costs in relation to such repair or replacement except as specifically
assumed by it. Misuse of this product or repairs by persons other than the
Manufacturer’s authorized personnel without the Manufacturer’s written
approval, will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether express
or implied including but not limited to those of merchantability or fitness for
purpose and shall constitute the sole remedy of the Purchaser and the sole
liability of the Manufacturer in respect of the sale of the product, whether
in the nature of breach or breach of fundamental term, or of negligence or
otherwise.
The Manufacturer shall not be liable for any special, indirect or consequential
damages or for any damages resulting from removal or replacement of a
heater subject to warranty claim without the Manufacturer’s authorization.
This Warranty is transferable by the original consumer purchaser of the
product. Any claims under this Warranty must be submitted in writing to
the Service Manager, Dimplex North America Ltd., 1367 Industrial Rd.,
Cambridge, Ontario N1R 7G8, Canada.
Set thermostat to desired temperature and both fan
1.
and heat should come on. Note that when desired
temperature is reached the fan operation will continue for
a short period after the elements have de-energized in
order to remove residual heat from the unit.
The fan motor is permanently lubricated and sealed at the
2.
factory and is maintenance free.
It is suggested that at the beginning of each season the
3.
front panel is removed and the wire connection condition
is checked and the unit is cleaned of dust and dirt with a
vacuum cleaner.
!
nOTE:
Always open the circuit breaker to disconnect
Operation and
maintenance
(A) Place frame over top
of tabs.
(B) Push in at bottom until
frame is flush with front
panel.
(C) Insert two screws to
hold frame in place.
Figure 3
A
B
C
C
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000260600RP
Capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3200070100RP
Fan Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00010034RP
Catalogue no.
Element
Cut-Out
Fan Delay
Thermostat
Control Knob
Transformer
Front Panel Kit
RFF86021-KIT
00013002RP
00009112RP
00033001RP
13678001RP
13691001RP
N/A
RFFFPA
RFF86021W-KIT
RFFFPW
RFF86031-KIT
00013004RP
RFFFPA
RFF86031W-KIT
RFFFPW
RFF86051-KIT
16210091RP
00009114RP
00033002RP
2600060400RP
N/A
2100130200RP
RFFVPA
RFF86051W-KIT
RFFVPW
RFF86081-KIT
16210093RP
00029001RP
2100130500RP
RFFVPA
RFF86081W-KIT
RFFVPW
RFF88021-KIT
00013001RP
00009112RP
00033001RP
13678001RP
13691001RP
N/A
RFFFPA
RFF88021W-KIT
RFFFPW
RFF88031-KIT
00013002RP
RFFFPA
RFF88031W-KIT
RFFFPW
RFF88051-KIT
16210092RP
00009114RP
00033002RP
2600060400RP
N/A
2100130200RP
RFFVPA
RFF88051W-KIT
RFFVPW
RFF88081-KIT
16210094RP
00029001RP
2100130500RP
RFFVPA
RFF88081W-KIT
RFFVPW
power to the unit prior to performing any maintenance or
service operation.
WARning:
Should the Over Temp light come on,
disconnect power to the heater or turn down the thermostat
fully counterclockwise and call a licensed electrician.
DO NOT USE HEATER UNTIL THE CAUSE OF THE
PROBLEM IS DETERMINED AND FIXED.