manualshive.com logo in svg

Dimplex Revillusion RBF24DLX, Руководство по обслуживанию

Поделиться
Скачать
Dimplex Revillusion RBF24DLX Скачать руководство пользователя страница 16

16

 

 

 

 

 

 

 

 

 

 

 

 

 

www.dimplex.com

Touch Pad Replacement

Tools Required:

  Phillips head screwdriver

   WARNING:

  If the firebox was operating prior to 

servicing, allow at least 10 minutes for the heating 

elements to cool off to avoid accidental burning of skin.

   WARNING:

  Disconnect power before attempting any 

maintenance to reduce the risk of electric shock or 

damage to persons.

1.  Unplug the fireplace or turn off the breaker to 

disconnect the power.

2.  Remove the front glass.
3.  Remove the two screws on each side of the touch pad 

assembly.

4.  Unplug the pin connector.
5.  Plug in the connector from the new touch pad.
6.  Install the replacement control assembly and secure 

with the 4 screws that were previously removed.

7.  Reinstall the front glass.

Thermistor Replacement (RBF24DLX)

Tools Required:

  Phillips head screwdriver

1.  Follow the steps of ‘Preparing for Service” on page 8.
2.  Remove the 2 hex head screws on either side of the 

controls and the 4 hex head screws (12 screws total)  

along each side of the panel and gently lower the 

internal assembly. (Figure 4)

3.  Disconnect the two main wire connectors - one on each 

side of the unit.

4.  Disconnect the hanging straps at the front, ensuring 

that you support the entire assembly, and lift the back 

of the assembly up and off of the hook at the back.  At 

this point you should be able to gently set the assembly 

on the surface in front of the unit to replace the heater 

assembly.

5.  Trace the thermistor wire back to the main board, 

cutting the cable ties as necessary. Unplug the 

defective thermistor.

6.  Hold the top and bottom parts of the thermistor 

housing, twisting them until they come apart. 

 

(Figures 5 and 6)

7.  Remove the thermistor from the thermistor housing.
8.  Insert the new thermistor into the thermistor housing.
9.  Secure the thermistor housing to the top panel.
10. Connect the new thermistor to the main control board.
11.  Reassemble the remainder of the firebox in reverse 

order from the instructions above.

Front Top 

Lights

Rear Top 

Lights

Power Supply 

Bracket Screws

Heater Assembly Bracket 

Screws 

(RBF24DLX)

Touch Pad 

Screws

Outer Thermistor Housing 

(RBF24DLX)

Figure 6

Содержание Revillusion RBF24DLX




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды