11. Swing the heater upwards to secure the opposite side of the
heater to the bracket and secure with previously removed
screws.
12.
Replace the grill box.
WARNING:
TO PREVENT THE RISK OF FIRE OR INJURY, DO
NOT OPERATE THE HEATER UNLESS IT IS FULLY ASSEM
-
BLED.
Wiring Diagram
Operation Instructions
WARNING:
Always disconnect power at the circuit breaker to the
unit prior to performing any maintenance or service operation.
CAUTION:
Allow adequate time for the element and body casing
to cool before attempting to work on the heater.
It is suggested that the heater be inspected regularly, for cleanliness
of the fan intake and exhaust grilles, to ensure optimal performance
is maintained. The grilles can be cleaned either by vacuuming off
all dust and dirt or, washing the grille box in warm, soapy water and
allowing to dry thoroughly before reinstalling. Once cleaning is com
-
plete replace the grille and restore power.
WARNING:
TO PREVENT THE RISK OF FIRE OR INJURY, DO
NOT OPERATE THE HEATER UNLESS IT IS FULLY ASSEM
-
BLED.
At least at yearly intervals the wire connection condition should be
inspected to ensure full electrical continuity and optimal performance
is maintained.
WARNING:
The user can perform cleaning ONLY. All other servic
-
ing should be performed by qualified service personnel.
Maintenance Instructions
Warranty
The Manufacturer warrants the RCH series ceiling heaters and com
-
ponents of the enclosed product against any defect in material or
workmanship for a period of one year from the date of purchase. In
full satisfaction of any claims under this Warranty the Manufacturer
will repair or replace without charge, in its factory or in the field as it
alone may decide, any parts which in its opinion are defective.
The Manufacturer shall not be responsible for any transportation or
shipping costs in relation to such repair or replacement except as
specifically assumed by it. Misuse of this product or repairs by per
-
sons other than the Manufacturer’s authorized personnel without the
Manufacturer’s written approval, will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether
express or implied including but not limited to those of merchant
-
ability or fitness for purpose and shall constitute the sole remedy of
the Purchaser and the sole liability of the Manufacturer in respect of
the sale of the product, whether in the nature of breach or breach of
fundamental term, or of negligence or otherwise.
The Manufacturer shall not be liable for any special, indirect or con
-
sequential damages or for any damages resulting from removal or
replacement of a heater subject to warranty claim without the Manu
-
facturer’s authorization.
This Warranty is transferable by the original consumer purchaser
of the product. Any claims under this Warranty must be submitted
in writing to the Service Manager, Dimplex North America Ltd., 1367
Industrial Rd., Cambridge, Ontario N1R 7G8, Canada.
Replacement Parts
Cutout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RCH-CUTOUT-RP
Fan Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RCH-FAN-RP
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RCH-MOTOR-RP
Housing Cover
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
RCH-COVER-RP
Thermostat
. . . . . . . . . . . . . . . . . . . . . . . .
RCH-THERMOSTAT-RP
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2015 Dimplex North America Limited
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
WARNING:
This heater must be properly installed before it is
used.
1.
Prior to energization remove all construction dirt (plaster, saw
-
dust, etc.) from interior and exterior of heater.
2.
Adjust the thermostat with a thin flat head screwdriver. This unit
is controllable from a line voltage wall thermostat or a low volt
-
age thermostat through a relay, refer to the wiring diagram.
Dimplex ceiling heaters are designed and tested for safe and trou
-
ble-free operation. All Dimplex ceiling heaters are protected against
overheating by a built-in thermal cutout. Free airflow throughout the
heater is extremely important for the most efficient operation of the
heater. Restricted airflow may cause the thermal overload protector
to cycle the heater “ON and OFF”. A cycling heater will not supply
sufficient heat to the room.
CAUTION:
Avoid direct contact of paper, fabric, or furniture with
heater.
6400400200
M
L1
CUTOUT
L2
THERMOSTAT
G
WALL STAT
L1
NOT PROVIDED