5.
Summer Use
When you no longer require heat you can turn both of
the switches supplying electricity to the heater to
OFF
.
Leave them in this position until you need to use the
heater again, at which time switch both switches to
ON
.
The heater has a built in battery so it will remember the
date & time and programmed settings and will revert to
these when the wall switches are turned to
On
.
6.
Advance
If you want to change the status of the comfort mode
(fan operation) without changing the programmed times
then you can use the Advance facility.
The advance facility allows the user to either switch
the fan on (Comfort on) when currently the fan is off
(Comfort off) or switch the fan off (Comfort off) when
currently the fan is on (Comfort on).
To indicate the advance feature has been selected the
text
ADVANCE
will be shown on the display screen (1).
The advance feature is automatically disabled at the
next programmed period.
To select advance press the
Advance
button (4) once.
The text
ADVANCE
will be displayed on the display
screen to indicate that advance has been selected.
7.
Boost
If for any reason you have run out of heat you can
activate the Boost element to provide additional room
heating. You can select the boost element to operate
for 1,2,3 or 4 hours. Once the time has elapsed the
boost element will automatically switch off.
To select the boost times you must fi rst select Advance
by pressing once the
Advance
button (4).
To select the boost times (1, 2, 3 or 4 hours) keep
pressing the Advance button. The boost time will be
shown on the display screen (1). To cancel the boost
operation keep pressing the advance button (4) until
the advance and boost text on the display screen (1) is
removed.
Note: The boost element runs on the peak
electricity tariff and therefore prolonged use of the
boost element can lead to higher running costs.
Quick Start Guide
- 2 -
8.
Auto Boost
If you require the boost element to automatically come
on during the Comfort On periods when the Auto Boost
function should be turned on. In this way the boost
element will come on automatically during the Comfort
On periods to enable the comfort temperature to be
attained.
To switch on Auto Boost press the
MENU
,
BACK
and
Selector Dial
for 3 seconds. Rotate the
Selector Dial
to highlight Confi gure and press the
Selector Dial
to
confi rm. Highlight Turn On by rotating the
Selector
Dial
and press
Selector Dial
to confi rm. Auto Boost is
now on. If you want to switch off Auto Boost repeat the
procedure and select Turn Off.
Note: The use of the Auto Boost function could
lead to prolonged periods when the boost element
is energised and this could lead to a signifi cant
increase in running costs.
