background image

18

PIN Lock Exceptions

It is possible to allow the ‘Advance’ and ‘Boost’ functions to be enabled/disabled when PIN Lock is active.

There are up to 4 exceptions. These exceptions include:

Advance

 

• Ability to activate using the ‘Advance Button’

Boost

 

• Ability to activate using the ‘hotkey’ listed in the Main Menu

 

• Ability to modify the Boost Temperature

 

• Ability to modify the Boost Duration

To confi gure these settings, see section ‘Product Lock Settings’ on page 19.

.

‘Advance Function’ Operation during UI Lock

If 

Advance

 has been enabled during UI Lock, the 

Advance

 button will remain active when UI Lock is active. This 

will function in the same way it would if the UI was not locked: only if the Heater is Locked into a Timer Mode. 

• If Advance is enabled during UI lock, the 

Advance

 button will function as normal while the Heater is set to a Timer Mode.

• If Advance is Disabled during UI lock, the 

Advance

 button will not function.

‘Boost Function’ Operation during UI Lock

If enabled, 

Boost

 will function in the same way as it does when PIN Lock is not active unless modifi cation of 

Boost 

Temperature 

and 

Boost Duration

 have been disabled.

Boost Temperature 

and 

Boost Duration

 will be set to the default values when ‘Boost’ is activated. If either of these 

values have been disabled during Product lock, when the user tries to modify them the heater’s display will show the 

message ‘Disabled’ and only the default value can be used. The default values can be changed outside of PIN Lock.

Содержание Q-Rad QRAD050E

































Отзывы: