7211970100R00
Midline Remote with Purifire™
User’s Guide
Operation
A. Room
Temperature
B. Set
Temperature
C. Dimmer
D. Flame Speed
Control
E. Sleep Timer
F. Purifire™
G. Purifire™ On/
Off
H. Flame & Heat
On/Off
I. Temperature
Down
B. Set Temperature
Press
H. Flame & Heat On/Off
button
to turn fireplace on. Press
J.
Temperature Up
to raise thermostat,
or
I. Temperature Down
to lower the
thermostat. Press both
J. Temperature
Up
and
I. Temperature Down
to
change °F to °C.
C. Dimmer
While the fireplace is running,
repeatedly press the
L. Dimmer Up
or
K. Dimmer Down
button to increase or
decrease the brightness of the upper
lights.
D. Flame Speed Control
While the fireplace is running, press the
N. Flame Speed Up
button to increase
the speed of the flame or press the
M.
Flame Speed Down
to decrease the
speed of the flame.
E. Sleep Timer
The Sleep Timer automatically shuts off
the fireplace after a preset time (from
30 minutes to 8 hours).
During fireplace operation, to set the
sleep timer press the
P. Sleep Timer
Up
button. Set the timer from 30
minutes through 8 hours. The fireplace
will automatically turn off when the
sleep timer reaches zero (0) minutes.
The sleep timer can be cancelled at any
time by pressing the
O. Sleep Timer
Down
button repeatedly until the sleep
timer displays nothing.
F. Purifire™
Press the
G. Purifire™ On/Off
button
to turn the Purifire™ function on. When
the Purifire™ function is on the
Purifire™ symbol will flash. When off,
the symbol will be solid. The default
setting for the Purifire™ is set at low
speed. Press the
Q. Purifire™ Speed
Down
or the
R. Purifire™ Speed Up
buttons to change between low and
high speeds.
Press the
G. Purifire™ On/Off
button
to turn the Purifire™ function off.
H. Flame & Heat On/Off Button
Press the
H. Flame & Heat On/Off
button
to turn the Flame/Heat function
on. When
B. Set Temperature
is
higher then
A. Room Temperature
the
heat will come on. To turn the heat off,
lower the
B. Set Temperature
so that
it’s setting is lower then the
A. Room
Temperature
. The default temperature
setting is 72°F (22°C).
!
NOTE:
When using the
remote control the heater
runs on a thermostat. Press
the
J. Temperature Up
or
I.
Temperature Down
buttons to
adjust the set temperature. Once
the desired set temperature is
reached the heater will turn off.
The heater will cycle
on
and
off
to maintain the desired set
temperature.
Child Lock
(Figure 1)
Depress tab on the battery cover on
1.
the back of the remote transmitter
and remove the battery cover.
Move
2.
Child Lock
tab to the right to
lock the remote transmitter.
Move
3.
Child Lock
tab back to the
left to unlock the remote transmitter.
Replace the battery cover.
4.
!
NOTE:
To temporarily unlock the
remote transmitter press (in order)
I. Temperature Down
then
J.
Temperature Up
then
K. Dimmer
Down
.
When the remote transmitter’s backlight
is illuminated the
Child Lock
is
bypassed. When the backlight is off the
Child Lock
is re-activated.
Figure 1
Unlocked
Locked
Child Lock Tab
M
L
N
K
B
E
A
D
I
C
P
O
J
F
R
Q
G
H
J. Temperature Up
K. Dimmer Down
L. Dimmer Up
M. Flame Speed
Down
N. Flame Speed Up
O. Sleep Timer
Down
P. Sleep Timer Up
Q. Purifire™ Speed
Down
R. Purifire™ Speed
Up
