Note: When the standby switch is operated it will switch off
the fan heaters if they happen to be
‘ON’
and they will not
come back
‘ON’
automatically when the appliance is switched
out of the standby mode. They will need to be deliberately
switched back
‘ON’
, if required, either manually or by remote
control.
A red light will indicate when the appliance is in standby
mode.
(See
Fig.1
detail
B,2
)
On the
LVA192
the fan heaters can be operated when the
scenes are in standby, if desired, and in which case there
will be two red lights displayed, one indicating the standby
mode and the other fan heaters
‘ON’
.
(See
Fig.1
detail
B,1 &
2
)
Remote Control Assembly.
Note: The remote control is packed separately in the carton.
1.
Slide open the battery cover on the back of the remote
transmitter.
2.
Install the AAA batteries into the remote control (see
Fig. 6
).
3.
Replace battery cover.
