background image

IMPORTANT

These instructions should be read carefully and retained for future use.

Note also the information presented on the appliance.

IMPORTANT SAFETY ADVICE
When using electrical appliances, basic precautions should always be followed to reduce 
the risk of fire, electrical shock, and injury to persons, including the following:
IMPORTANT – The wall bracket supplied with the appliance must be used.

WARNING - DO NOT USE THIS HEATER IN THE IMMEDIATE SURROUNDINGS OF 
A BATH, A SHOWER OR A SWIMMING POOL.
IMPORTANT – If the heater is installed in a room containing a bath or shower, it must be 
so installed that switches and other controls cannot be touched by a person using a bath 
or shower. 
Do not use outdoors. 
Do not locate the heater immediately below a fixed socket outlet or connection box.

WARNING: In order to avoid overheating, do not cover the heater. Do not place material 
or garments on the heater, or obstruct the air circulation around the heater, for instance 
by curtains or furniture, as this could cause overheating and a fire risk.
NEVER cover or obstruct in any way the heat outlet slots at the top of the heater or the air 
inlet slots in the base of the heater. 
The heater carries a warning ‘DO NOT COVER’ to alert the user to the risk of fire that 
exists if the heater is accidentally covered.

CAUTION - Some parts of this product can become very hot and cause burns. Particular 
attention has to be given where children and vulnerable people are present. *

This appliance can be used by children aged from 8 years and above and by persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge if 
they have been given supervision or instruction concerning use of the appliance in a safe 
way and understand the hazards involved. 
Children shall not play with the appliance. Cleaning and user maintenance shall not be 
made by children without supervision. 
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance 
provided that it has been placed or installed in its intended normal operating position and 
they have been given supervision or instruction concerning use of the appliance in a safe 
way and understand the hazards involved. Children aged from 3 years and less than 8 
years shall not plug in, regulate and clean the appliance or perform user maintenance. 

Note that due care and consideration must be taken when using this heater in series 
with a thermal control, a program controller, a timer or any other device that switches on 
the heat automatically, since a fire risk exists when the heater is accidentally covered or 
displaced. 
If the supply cord is damaged it must be replaced by the manufacturer or service agent or 
a similarly qualified person in order to avoid a hazard.
WARNING: Servicing and product repairs should only be undertaken by the manufacturers 
approved service agent or a similarly qualified person, using only exact manufacturer 
approved spare parts.

*NOTE: In order to comply with European Standard 60335 we are obliged to include
the cautionary reference to surface temperature. However LST heaters are designed to
meet NHS Requirements for ‘Safe Hot Water and Surface temperatures’. LST surfaces do
not exceed 43°C at 21°C room temperature and therefore operate at significantly lower 
surface temperatures than allowable by the Standard.

2

Содержание LST050





















Отзывы: