Dimplex LAB 07M, Инструкция по установке и эксплуатации

Страница: 13 / 24

www.dimplex.de EN-11
9.2
Englis
h
9 Hydraulic circuit
9.1 External hydraulic circuit
recommended
The following additional items are required in addition to the heat
pump
„ Pump
„ Buffer tank
„ Expansion vessel
„ Pressure relief valve
„ Air purge valve
„ Manual cut-off valves
„ High pressure flexible joints
„ Manometer
„ Flow switch
„ Cables for connection to the mains supply
„ Interconnecting pipe work between the heat pump, heating
system and other components.
NOTE
The hydraulic pipes connected to the machine must be adequately sized
for the actual water flow rate required by the system to guarantee a
constant flow to the heat exchanger. The installation of manual cut-off
valves between the unit and the rest of the system is mandatory. Failure
to comply with this will invalidate the warranty.
9.2 LAB recommended hydraulic
circuit (°)
Integration diagram
Heat pump included:
„ Moducontrol
„ Circulation pump
„ Expansion panel
External components:
„ Combination tank
- 100 l buffer
- 300 l hot water
„ Inline electric heater
„ Safety valve
„ Expansion vessel
(if 2 l are not sufficient)
„ 3-way valve
„ Hot water thermostat
„ Flange heater DHW with external control
/DUJHEDVH*