4
VI Attach inner wall bracket sleeve (c) with clamping piece (d)
and nut (e) to towel warmer (between the second and third
rail). Tighten nut only finger-tight to allow for horizontal ad-
justment.
VII Roughly align wall bracket sleeves on heater in accordance
with dimensioned diagram (dimensions A and B).
VIII Slightly lift heater and check accuracy of fit of outer and in-
ner wall bracket sleeve, adjust if necessary.
IX Insert inner wall bracket sleeve into outer sleeve and re-
tighten Allen screw (a). Determine proper distance from
wall before tightening the screw.
X Firmly tighten nut of clamping piece.
Push cap (f) into place.
3. Electrical Connection
It is imperative that current regulations and the relevant instal-
lation instructions be complied with.
If the heater is installed in a bathroom, it must be protected by
a residual current device (FI
≤
30 mA)!
Due to its double-insulated design, the heater requires no
earthing conductor.
To avoid risk, defective mains supply cables must be re-
placed by the manufacturer or the manufacturer's customer
service or a similarly qualified person.
The towel warmer can be connected to any socket outlet with
earthing contact. The installation of a wall outlet socket may
only be performed by a qualified electrician observing the
relevant regulations.
The appliance is also suited for fixed wiring (to be carried out
by a qualified electrician only).
If fixed wiring is used, the heater can also be operated by
means of a thermostat or a timing switch.
4. Heating Operation
For efficient and temperature-controlled drying, drape towel
over the top rail. Do not place more than 2 layers of towels or
other garments over the appliance.
The towel warmer is intended only for drying textiles that
have been thoroughly rinsed in water as soap and detergent
residue may cause discoloration.
On appliances with a power plug, the on/off switch is located
directly on the plug and features a power "on" indicator light.
In the case of fixed wiring, your qualified electrician must pro-
vide a separate on/off switch. As an alternative, the heater
can also be operated by means of a thermostat or a timing
switch.
The towel warmer features two built-in safety cut-outs – one
at the top and one at the bottom – that automatically shut off
the appliance for a few minutes in case it overheats.
5. Malfunctions
In the event that the appliance fails to produce any heat,
please check
•
whether the appliance is turned on
•
whether the automatic safety breaker at the distribution
board has tripped.
•
If a room thermostat or a timing switch is used, check the
relevant settings.
If the problem cannot be remedied, please contact your local
electrical retailer or the nearest customer service.
To be able to process your service request, the product num-
ber (E-number) and the manufacturing date (FD-number) of
the appliance are required. These data can be found on the
rating plate.
Repairs to the appliance, or any other intervention, may only
be performed by a qualified electrician or the after-sales cus-
tomer service.
6. Customer Service, Spare Parts
Robert Bosch Hausgeräte GmbH
Deutschland Österreich
Auftragsannahme Auftragsannahme
Tel.-Nr. +49 (0) 1801 / 22 33 55
Tel.-Nr. 0810 240 260
Fax.-Nr. +49 (0) 1801 / 33 53 07
Fax.-Nr. (01) 60575 51212
Ersatzteilbestellungen Ersatzteilbestellungen
Tel.-Nr. +49 (0) 1801 / 33 53 04
Tel.-Nr. 0810 240 261
Fax.-Nr. +49 (0) 1801 / 33 53 08
Fax.-Nr. (01) 60575 51212
Email: [email protected] [email protected]
Spare orders via internet:
http://www.dimplex.de/en
7. Cleaning
The appliance must be turned off and allowed to cool before
undertaking any cleaning work.
Wipe the outside of the appliance with a soft, damp cloth and
then wipe it dry.
Do not use abrasives or furniture polish for cleaning as these
may damage the surface.
8. Technical Specifications
Type
Rated output
Number of
rails
Colour Weight
DTR 350 C
300 watts
18
chrome 7.9 kg
DTR 350 W
300 watts
18
white
7.9 kg
Rated voltage 230V~, 1/N.
The appliances come complete with supply cord and plug
with integrated on/off switch.
Protection type IP 24 (splash-proof)
Class of protection II (double-insulated, without earth conduc-
tor).
9. Guarantee
This product is guaranteed for two years in accordance with
our guarantee terms.
Disposal
The appliance should not be disposed of with
household waste, but should be taken to your
local recycling centre.
Glen Dimplex Deutschland
GmbH
Phone +49 (0) 9221 / 709-564
Technical specifications subject to change
Am Goldenen Feld 18
Fax +49 (0) 9221 / 709-589
Internet: www.dimplex.de
D-95326 Kulmbach
E-Mail: [email protected]
f
d
e
