Dimplex DS5804 Скачать руководство пользователя страница 7

 

   

 

 

 
 

RESETTING THE TEMPERATURE CUTOFF SWITCH 

 

Should the heater overheat, an automatic cut out will turn the heater off and it will not come 
back on without being reset.  It can be reset by switching the MAIN ON/OFF SWITCH to OFF 
and waiting 5 minutes before switching the unit back on. 

 

CAUTION 

If you need to continuously reset the heater, unplug the unit and call Dimplex North America 
Limited at 1-800-668-6663. 

 

REMOTE CONTROL 

The fireplace is supplied with an integrated on/off 
remote control.   

Note: Ensure that the fireplace 3 position switch is set to 
the remote control setting.

 

 

To operate, push the ON button to turn fireplace on, push the 

 

OFF button to turn the fireplace off. 

 
 

BATTERY REPLACEMENT 

To replace the battery, slide battery cover open on the hand 
held transmitter. 
Correctly install one 12 volt (A23) battery in the battery holder. 

 

Close the batter cover. 

 

MAINTENANCE

 

 

WARNING 

 

Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, 
electric shock or damage to persons. 

 

LIGHT BULB REPLACEMENT 

 

Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid accidental 
burning of skin.

 

Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity 
and detail of the log exterior disappears.  There are two bulbs under the log set which generate 
the flames and embers. 
 
 

 

BATTERY 
COVER 

BATTERY

Содержание DS5804












Отзывы: