6
5. OPERATING INSTRUCTIONS
First, connect the power cord to the correct power supply (220-240V~/50Hz/ 10
amps).
1.
Press the power button at the back of the unit to turn it on. You will hear
2 beeps, which indicates the unit is in standby mode.
2.
Once in standby mode, the power button needs to be pressed to start the
heater. This is the only button that works under standby mode. Press it a
second time to switch it off.
Touch Sensor Panel
•
Press the “On/Off” button to turn the unit On/Off.
•
Press the “Swing” button to start or stop oscillation.
-
The oscillation indicator light will illuminate when the swing
function is activated.
-
The oscillation indicator light will be turned off when in fixed
operation.
•
Press the “Temp/Timer” button to set your desired temperature. You can
increase or decrease temperature by pressing the + or – button. The
temperature range is from 15°C to 35°C and in increments of 1°C.
•
Press the “Temp/Timer” button a second time to set the timer. This will
tell the heater how long you want the unit to operate before shutting off
automatically. The timer range is from 1-12 hours and in increments of 1
hour.
•
Press the “Heater” button to set the unit on low or high heat.
-
The low heat indicator light will illuminate when the “Heater”
button is pressed once.
-
The high heat indicator light will illuminate when the “Heater”
button is pressed twice.
