![Dimplex DFP15-1134NG Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/dimplex/dfp15-1134ng/dfp15-1134ng_owners-manual_2504880009.webp)
9
Operation - Remote (Optional)
button to turn the fireplace off
.
The amount of heat produced will
be dependant on positioning of
manual heat controls.
!
NOTE:
Ensure that the
fireplace’s on/off switch is set
to the remote control setting (“
II
” position).
Initialization/Reprogramming
Follow these steps for remote
control initialization if required:
①
set the main power switch to
oFF.
②
Wait a minimum of five (5)
seconds and set the 3 Position
switch to the remote position
(refer to operation section).
③
Within
10 seconds of re-
acquiring power, press the on
button located on the remote
control transmitter.
!
NOTE:
You will have only 10
seconds to perform this last
step. Failure to do so will
result in these steps needing
to be followed again.
This will synchronize the remote
control transmitter and receiver.
Battery Replacement
①
slide battery cover open on
the hand held transmitter
(Figure 3).
②
Correctly install one (1) 12 Volt
(A23) battery in the battery
holder
.
③
Close the battery cover
.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or retailer for recycling
advice in your area.