Dimplex DCMIST25, Инструкция по эксплуатации

Страница: 11 / 14

Operation & Set Up
1. Remove the unit from its packaging & place on a firm stable surface.
2. To use the
MIST
function, fill the water tank as instructed on the previous page.
3. Plug into a power outlet and press the ON/OFF button to turn ON the unit.
4. The unit will operate initially on a continual basis. If a set period of operation is
required, please follow the TIMER/PRESET instructions on page 8.
5. Select the desired fan
FAN SPEED
by pressing the
FAN SPEED
button. Refer to
page 8 for different settings.
6. Select the operation
MODE
as required, by pressing the
MODE
button. Refer to
page 8 for different settings.
7. Press the
ROTATION
button if 360 degree rotation is required.
8. To switch the unit off at any time, press the OFF button.
Precautions
• Do not overfill the water tank (check the MAX fill line).
• Use only cold, clean filtered water.
• The unit is equipped with a number of safety devices, including water shortage
protection & tank removal protection.
• Do not allow the same water to sit in the machine for a prolonged period.
• It is recommended that any water left in the machine for 3 days or more be re-
moved and replaced with clean water.
• The control panel must not come in contact with water or any other liquids.
Using the Remote Control
1. Open the battery cover of the remote control, and insert 2 x AA batteries.
2. Please point to the receiver when using the remote control.
3. If the battery voltage is low, please open the battery cover as per the diagram
and replace with a new battery (2 x AA). Then replace the battery cover.
11