8
www.dimplex.com
Operation
Electric Fireplace Manual
Control
The manual controls for the
fireplace are located in the upper
right hand corner (Figure 1).
A. Main On/Off Switch
Supplies power to the 3 position
manual control switch.
B. 3 Position Manual Control
Switch
Remote (right position):
The
unit is operated with the remote
control.
Flame (center position):
The
flame effect is turned ON.
Flame & Heat (left position):
The flame effect and heater are
turned on simultaneously. When
Figure 1
a
B
C
the manual control is in the
Flame
& Heat
position the heater does
not run on the remote operated
thermostat.
!
NOTE:
When the manual
control switch is in the
Flame
and
Flame & Heat
positions,
the fireplace unit will not
operate with the remote
control.
C. Initialization Button
used to synchronize the remote
control.
Resetting The
Temperature Cutoff
Switch
Should the heater overheat, an
automatic switch will turn the
heater off and it will not come
back on without being reset.
The temperature cutoff switch
can be reset by unplugging the
unit, waiting five (5) minutes and
plugging the unit back in.
CAUTION:
If you need to
continuously reset the
heater, unplug the unit and call
Dimplex north america Limited
