8
OPERATION
DRAINING THE WATER TANK
When the air conditioner is used, condensation may be produced that
cannot be removed via the exhaust hose. This water is captured by an
internal water tank. When the water tank is full, the unit will stop working
and the
FULL
indicator light will turn on.
When the
FULL
indicator light has turned on, the water tank must be
manually drained by following the below steps:
1. Switch off and unplug the unit.
2. Move the unit to a suitable place to drain the water. Consider placing
a tray or container under the outlet to catch the water.
3. Remove the lower drain plug (9) - refer to parts illustration on page 3.
4. Slightly tilt the unit to the rear to drain the water.
5. Once the water has completely drained, replace the drain plug (9).
IMPORTANT:
• Ensure the drain plug is re-fitted to the drain outlet before use.
• Extend the exhaust back out the window before restarting the unit.