Dimplex DAC 9000, Руководство пользователя, Страница: 10 / 11

10
Dehumidification.
NOTE!
The machine operates in the cooling mode but it does not lower the room
temperature. It absorbs the excessive humidity present in the air.
1. Plug the unit into proper electrical outlet.
2. Position the exhaust tube as shown or remove
from the air-conditioner.
3. Turn the TIMER to position ON or 1 to 8
hours automatic timer setting.
4. Set the FAN SPEED control to the desired
output of airflow, high or low.
5. Set the THERMOSTAT to the maximum
cooing position.
6. When the water tank is full, the light above
'Power' switch will light and the compressor will
shut off automatically, the fan will stay on circulating the air. At this time, you must
empty the water tank as described "Draining the Condensed Water".
Continuous Drainage.
In very humid conditions to avoid the unit from continually shutting down when the
water tank is full the unit can also be continuously drained if a convenient drainage
position is available.
Important!
The water is only gravity drained therefore the tube must lay lower and drain at a lower level
than the outlet tube at the rear of the air conditioner.
• Before operating the air conditioner, remove the water stopper, take out the
rubber plug and connect a PVC tube 12mm diameter.
Maintenance.
Always unplug the unit from the mains before beginning the cleaning.
Cleaning the housing
• Use a soft, damp cloth to wipe the body clean.
• Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or
other cleansing solutions.These all could possibly hurt the cabinet.
Cleaning the filter
• Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the
filters and then rinse thoroughly under running water (no hotter than 40°C).
• Dry thoroughly before replacing.