Dimplex DAC 12000R, Руководство пользователя, Страница: 10 / 12

10
Drainage.
During the process of cooling, water is extracted from the air and collected in the water
tank inside the unit.When the tank is full the compressor will stop and the ‘Compressor
On Indicator’ (Indicator 9 on control Panel) will blink to remind you to empty the water
tank. During this time the fan will continue to operate, circulating the air.The water tank
should be emptied as follows.
1. Turn off the unit.
2. Position the supplied plastic water tray,
flat on the floor, under the drain hole.
3. Remove the water stopper and the
rubber plug. Empty the condensed
water from the air conditioner.
4. When the water tray is almost full,
replace the rubber plug to stop the
flow of water, empty the water tray.
5. Repeat step 2, 3, 4, till all the condensed
water is emptied.
6. After all condensed water is drained,
replace the rubber plug and water
stopper.
The Compressor indicator should
stop blinking.
1. All condensed water must be drained
prior to relocation or storage.
Water stopper
Rubber
plug Water
tray