17
other Temperature Measurement
unit.
4. Synchronization Function
The controller features CON-
NEX
TM
, a wireless technology
that works with Dimplex CON-
NEX
TM
enabled heaters to provide
simple whole home connectivity
and comfort. CONNEX
TM
control-
lers are available to control one
or multiple heaters within a 50’
(15 m) radius. In order for the
controller to have this function,
the CONNEX
TM
enabled heater
and the controller will need to be
synchronized.
!
NOTE:
See Initial Setup sec-
tion for detailed instructions.
5. Lock Function
The controller can be "Locked" so
that the display on the controller
is disabled to prevent any chang-
es to the settings in the system.
To Enable:
1. Press the Icon.
2. Enter the sequence Zone 1,
Zone 2, Zone 3 and Zone 4,
then press the
Icon.
The Controller will display the
Icon and continue to operate
based on the settings and signals
General Functions
from the controller.
!
NOTE:
Adjustments can
be made to individual heaters
by entering its specific unlock
sequence and adjusting the set
point.
CAUTION:
The adjusted
heater will only retain the new set
point until an event occurs on the
controller and a new set point is
sent.
To Disable:
1. Press and hold the Icon for
3 seconds.
2. Enter the sequence Zone 1,
Zone 2, Zone 3 and Zone 4,
then press the
Icon.
