Dimplex CHESIL CLS20, Руководство пользователя

Страница: 3 / 4

Chesil
Model: CLS20
NZ
Important Safety Advice
When using electrical appliances, basic
precautions should always be followed to reduce
the risk of fire, electrical shock and injury to
persons, including the following:
If the appliance is damaged, check with the
supplier before installation and operation.
Do not use outdoors.
Do not use in the immediate surroundings of a
bath, shower or swimming pool.
Do not locate the appliance immediately below
a fixed socket outlet or connection box.
The appliance carries the Warning symbol DO
NOT COVER, indicating that it must
not be covered.
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by Children without supervision.
Children of less than 3 years should be kept
away unless continuously supervised. Children
aged from 3 years and less than 8 years shall
only switch on/off the appliance provided that
it has been placed or installed in its intended
normal operating position and they have been
given supervision or instruction concerning use
of the appliance in a safe way and understanding
the hazards involved. Children aged from 3
years and less than 8 years shall not plug in,
regulate and clean the appliance or perform
user maintenance.
Do not use this appliance in series with a
thermal control, a program controller, a timer
or any other device that switches on the heat
automatically, since a fire risk exists when the
appliance is accidentally covered or displaced.
Ensure that furniture, curtains or other
combustible material are positioned no closer
than 1 metre from the appliance.
In the event of a fault unplug the appliance.
Unplug the appliance when not required for
long periods.
Although this appliance complies with safety
standards, we do not recommend its use on deep
pile carpets or on long hair type of rugs.
The appliance must be positioned so that the
plug is accessible.
If the supply cord is damaged it must be
replaced by the manufacturer or service agent
or a similarly qualified person in order to avoid
a hazard.
Keep the supply cord away from the front of
the appliance.
Warning: In order to avoid overheating, do not
cover the appliance. Do not place material or
garments on the appliance, or obstruct the air
circulation around the appliance, for instance
by curtains or furniture, as this could cause
overheating and a fire risk.
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Warning: In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
CAUTION - Some parts of this product can become
very hot and cause burns. Particular attention has
to be given where children and vulnerable people
are present.
WARNING: This heater is not equipped with a
device to control the room temperature. Do not use
this heater in small rooms when they are occupied
by persons not capable of leaving the room on their
own, unless constant supervision is provided.
The heater carries the Warning symbol, indicating
that it must not be covered. The fireplace must be
securely fixed to the wall using the fixings brackets
and fixing instructions provided.
General
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the fire to your
supplier.
The fire incorporates a flame effect, which can be used with or
without heating, so that the comforting effect may be enjoyed at
any time of the year. Using the flame effect on its own only requires
little electricity.
Before connecting the heater
check that the supply voltage is the
same as that stated on the heater.
Please note: Used in an environment where background noise is
very low, it may be possible to hear a sound which is related to
the operation of the flame effect. This is normal and should not
be a cause for concern.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED
This heater must be used on an AC ~ supply only and the voltage
marked on the heater must correspond to the supply voltage.
Before switching on, please read the safety warnings and operating
instructions.
Fixing
- see
Fig. 1&4.
The appliance should be securely fixed by drilling 3no. holes 35mm
deep at a diameter of 6mm as per Fig. 4 and then insert the 3no.
wall plugs supplied with this product. The fittings supplied with this
product are for a block walls (other wall types will require special
fittings not supplied with this product)
After drilling the holes and inserting the wall plugs, screw in two
of the supplied screws in to the top two holes, ensure the head of
the screws are 3-5mm away from the surface of the wall to allow
the product to hang on them, now lift the product into place (this
may require two people). When you have the fire securely inplace
please insert the final screw into the third drilled hole, this will line
up with a bracket already fitted to the product.
Continued