Cleaning and User Maintenance
WARNING: BEFORE UNDERTAKING CLEANING
OR MAINTENANCE WORK ON THE APPLIANCE
DISCONNECT THE ELECTRICITY
SUPPLY.
General cleaning
External appearance can be maintained by wiping occasionally
with a damp cloth; for stain removal, weak soap solution can
be applied, then wipe dry.
Internal cleaning and maintenance
From time to time it may be necessary to remove the heater
from the furniture unit so that the interior of the heater and
the heater compartment can be cleared of any dust or fluff.
To remove, unscrew the eight fixing screws and withdraw the
appliance from the plinth. Remove the top cover and gently
remove dust with a soft brush and a vacuum cleaner, taking
care not to damage the fan or heat exchanger.
Do NOT tamper with any electrical parts.
Remount the heater in the plinth ensuring the rear support
bracket is still adjusted correctly, the flexible pipes are not
kinked and the mains cable is not touching any hot or sharp
surfaces.
Recycling
For electrical products sold within the European
Community.
At the end of the electrical products useful life it
should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice in your country.
After Sales Service
Your product is guaranteed for two years from the date of
purchase. After sales information or assistance with this
product can be found on our website
www.dimplex.co.uk/support
Your rights under this guarantee are additional to your
statutory rights, which in turn are not affected by this
guarantee.
Please do not return a faulty product to us as this may result in
loss or damage and delay in providing you with a satisfactory
service.
If following these steps your product still does not operate
you should return it to your point of purchase.
Please retain your receipt as proof of purchase.
The product complies with the European Safety Standards EN60335:2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014:1,
EN55014:2, EN61000:3-2 and EN61000:3-3 which cover the essential requirements of EMC Directive 2006/95/EC and the LVD Directive 2004/108/EC.
