background image

Appliance ID & Software versions

The appliance and remote control are preloaded with software to ensure correct 
operation. In some cases it may be necessary to reference the software version that 
is installed on the remote or appliance. Both software versions along with the unique 
Bluetooth appliance ID can be viewed using the remote control

To view the information: 

• Hold down 

ENTER

 for 2 seconds

• Use the arrow keys or the 

ENTER

 to scroll through the information pages

•  Once all the information screens have been viewed, the remote will return to 

the home screen.

Alternatively if idol for 5 seconds the screen will return to the home screen. You may 
exit this screen at any time by pressing 

BACK

.

UI Software

version

Not assigned

Remote Software

Version

UI ID 

(NAME)

Service Settings

Temperature Settings

To choose whether the remote displays degrees 
Celsius or degrees Fahrenheit:

• Hold down the 

MENU

 button for 2 seconds

•  Use the arrow keys to toggle 

o

C or 

o

F. 

The highlighted option will be flashing.

•   Press 

ENTER

 to confirm your selection and 

return to the home screen

34

Содержание BFH24E









































Отзывы: