Dimplex BF5000, Руководство по запчастям и обслуживанию

Страница: 17 / 33

15
BF5000NT, BF5000, EF2604, SF2603, DF2603
If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs
and heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE HEATER ASSEMBLY
1. Remove the firebox trim by grasping both sides of the trim and pulling straight up.
2. Remove the firebox from the mantel.
3. Remove the (4) retaining screws on the top cover and remove the top, placing it
upside down on the top of the unit being careful not to damage any of the wiring.
4. Locate the heater assembly mounted on the top panel and disconnect the wiring
clips and connections noting their original locations.
5. Turn the top over, remove the heater mounting screws and remove the heater
assembly.
6. Properly orientate the new heater assembly and connect all of the wiring
connections.
7. Reassemble in the reverse order as above.