IMPORTANT REMARKS
The manufacturer has the right to modify the product without previous
notice; it also declines any responsibility to damage or injury to people or
things caused by improper use or wrong installation.
PLEASE READ THIS INSTRUCTION MANUAL VERY CAREFULLY BEFORE
INSTALLING AND PROGRAMMING YOUR CONTROL UNIT.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE WITH THE
EUROPEAN REGULATIONS IN FORCE:
EN 13241-1:2016
(Industrial, commercial, garage doors and gates. Product
standard, performance characteristics
EN 12453:2017
(Safe use of automated locking devices, requirements)
• The installer must provide for a device (es. Magnetotermical switch) ensuring
the omnipolar sectioning of the equipment from the power supply.
The standards require a separation of the contacts of at least 3 mm in each pole
(EN 60335-1).
• The plastic case has an IP55 insulation; to connect flexible or rigid pipes, use
pipefittings having the same insulation level.
• Also the automation upstream electric system shall comply with the laws and
rules in force and be carried out workmanlike. The manufacturer declines any
responsibility if the installation don’t comply with the regulations in force.
• Using the motor in dusty environments and saline or explosive atmospheres is
forbidden.
