Intelligent Wireless Portable Fiber End Face Microscope
14
3 Software basic functions
3.1 Software installation and update
1. Copy the software that needs to be updated to the AUTOGETWIFI device SD card, and
then install the SD card to the AUTOGETWIFI device card slot.
2. Start the AUTOGETWIFI device and enter the Software Settings - About interface, click
Upgrade. After the upgrade is complete, it prompts you to restart the device.
Note:
1. If there is no updateable software in the SD card, the system will prompt "No upgradeable
version found inSDCard"
3.2Mobile terminal interface
3.2.1 Main interface
AutoGetWiFi power on,Enter the software main interface.
Figure 3- 1 Main interface