Checking the Connection
Turn on the monitor by pressing the monitor power button.
1
Check whether the screen turns on when starting the PC.
2
If the monitor is working normally, the LED signal lamp shines green (in 2D mode) or
red (in 3D mode).
3
4
If the LED signal lamp shines green or red and there is no image on the display, please
check whether the screen setup of the PC is set at a resolution in the range of
640x480~1280x1024 and at a frequency in the range of 60Hz~75Hz. In case of
receiving an inappropriate video signal, the screen shows the message "Out of Range".
5
If the LED signal lamp shines red for a while, then turns off and "No Signal" (photo
below) shows on the screen for a minute, please check the connection between
computer and monitor.
Chapter 2
12
