26362050_V_1_0.DOC
20/20
5.1 Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
6. TECHNICAL SPECIFICATIONS
TGA-50R
Power supply:
230 V AC, 50 Hz~
Maximum Power:
50 W
Input impedance:
20 mV
Frequency range:
100 Hz - 8 kHz
Speaker:
12“
Dimensions (LxWxH):
720 x 570 x 300 mm
Weight:
29 kg
Please note: Every information is subject to change without prior notice. 14.11.2006 ©
