Dillon GTX-Plus 100, Руководство пользователя

Страница: 10 / 26

GTX-Plus Series User’s Manual REV 3.0 01/03/2013 10
Computer Control of Force Gauge A computer can control the force
gauge by sending USB commands.
USB Command Action
“m” Changing measure mode.
“u” Changing measure unit.
“z” Zero the gauge.
“r” Reset the gauge.
Main Menu
Press MENU/ESC key to access the main menu. To move
between the option listed on the main menu page, press UP and DOWN
arrow keys to move the cursor. Press ENTER to select the sub-menus,
activate feature and enter values. Within sub-menus UP, DOWN LEFT
and RIGHT arrow keys will also change numerical values. Press ESC to
return to the main menu page.
Figure 4 Main Menu
1) SETUP Press the MENU key, the display will show main menu page
and use UP and DOWN to move the cursor point to SETUP. Press the
ENTER key. The display will show the setup menu page. Press ESC key to
return to the main menu page.
SETUP MENU 1/2
1) AUTO-OFF
2) PASS-FAIL
3) DROP LEVEL
4) FILTERING
5) CUSTOM UNIT
6) AUTO AVERAGING
Figure 5 Setup Menu
MAIN MENU
1) SETUP
2) DATABASE
3) CALIBRATION
4) DATE&TIME
5) DIAGNOSTIC
6) ABOUT
SETUP MENU 2/2
7) SELECT OUTPUT
8) LOAD DEFAULT