INTRODUCTION
The motorized test stand is a tool to improve the quality of force testing results. It
helps attain the best testing repeatability by pulling or pushing at extremely consistent
speed in a direction in-line with the measuring device, such as a force gauge.
Motorized stands also improve ergonomics and testing throughput.
The Dillon GTS-1000 is a ball-screw driven digital test frame with capacity up to 1000 N
(220 lbf / 100 kg).
The dimensions, speed range and capacity have been carefully
optimized to cover the test procedures and specimen sizes most often needed by
quality departments within many sectors of R&D and production
industry. Complemented by a Dillon force gauge, grips and
accessories, it constitutes a key component in force
measurement systems to accurately test a wide range of
products.
This tester may be used for tensile and compression tests of
many types (e.g. break, peel, flexural, top-load and many more).
The digital controls make testing speed more accurate and the
stand more intuitive to operate.
The crosshead features
he Dillon GTX and GS force gauges are recommended for use with the GTS-1000 Test
ith correct use your GTS-1000
will give many years of reliable service.
ad this operating manual thoroughly before attempting to operate
an adjustable gen
erous 5 inch (127 mm) throa
t. Combined with
the side-mounted controls and large working area, it can test large samples.
T
Stand. It can accommodate other gauges with proper fixturing and alignment.
W
Please re
your GTS-1000 force tester.
3
