Dillenger D6 Hybrid Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 23

Dillenger D6 Hybrid Скачать руководство пользователя страница 6

6

UNboXiNG

Unboxing your Dillenger will be very exciting, but it’s important to take care when
unboxing the bike as it’s possible to accidentally damage the bike or misplace crucial
parts. It’s also much easier to unbox the bike with someone to help you.
Remove the protective packaging from the bike carefully with a pair of scissors or a box
cutter. Make sure you don’t misplace any components in the lose packaging (there can be
quite a lot of protective packaging used).

Note: The bike depicted in the following pictures is of a slightly different model. this will not
effect the assembly instructions given. (The only difference is the motor position and some
minor features)

After you’ve taken your Dillenger out of it’s shipping carton, you should have these parts:

1. The Complete Bike

2. Front Wheel

PlEASE NoTE

The keys will be securely fastened to the frame or handlebars of
your bike. Make sure you do not lose these as they are coded and a

replacement set can only be fitted in a Dillenger factory.

«
...
4
5
6
7
8
...
»

Содержание D6 Hybrid
























Отзывы:

Нет отзывов