11
Password Parameter settings
Press and hold the UP & DOWN buttons together for 1 second to get into the Basic
Parameter settings, then press and hold the UP & DOWN buttons together for 1 second
again to get into the Password Parameter settings.
Password
The symbol PSd shows on the top, and you need to enter the password. Press the UP or
DOWN buttons to change the password value (0~9) and shortly press the POWER button to
the next value. The password is 4 digits, the default password is “0512”. Press the POWER
button when you finished entering the password. The display will return to the Speed (Real-
Time) display automatically if the password is incorrect. With the correct password you will
enter the Wheel diameter setings.
Wheel diameter
Speed limit set
Level setting
Current temperature
Maximum temperature
The lowest temperature
The total
voltage
Current
Average
current
The remaining capacity
Full charge capacity
The relative state of
charge
The absolute state of charge
Cycle
The maximum
no charging time
No recent charging time
NO.1 Voltage battery
Voltage batteries
N… Voltage battery