DIHL VC-HH216 Скачать руководство пользователя страница 6

Страница: 6 / 12

Power cable

Charging port

STEP 1:

STEP 2:

NOTE:

WARNING:

Connect the mains power adapter to the charging port on the vacuum cleaner.

Plug the mains power adapter into the mains power supply. A flashing red light will indicate that

the battery is charging. On completion, the light will stop flashing and will stay lit.

You cannot use the device whilst charging, and it may become warm to the touch.

If the vacuum cleaner is left charging for a long time, the charge indicator light will go out for

energy saving purposes. Always unplug the mains power adapter after fully charging the vacuum

cleaner.

Do not use any mains power adapter other than supplied, as this could damage the unit or cause

an electrical / fire hazard.

Before using your vacuum cleaner for the first time, you must clean it with a soft, damp cloth and dry it thoroughly.

Do not immerse it in water or any other liquid.

The battery will also need to be charged for 3 to 4 hours before your first use; see below for details.

Subsequent charging will take between 2 and 3 hours on average and you should get approximately 20 to 25

minutes of operating time depending on use.

Before First Use

Charging the Vacuum Cleaner Battery

CHARGING 04

Содержание VC-HH216












