DIHL Dual Sensor Bin, Руководство пользователя

Страница: 4 / 5

TROUBLESHOOTING
3
The table below contains some common instructions you may find useful.
Note: If you have followed all steps in the manual and the issues still occur, please contact the retailer.
Ensure that the bin lid is cleaned regularly with a clean, dry cloth. Do not let dirt build up around the
sensor mechanism ad this will cause the sensor to stop working overtime.
Lid will not open
Lid will not close fully
Lid operates slowly
Lid opens and slams
back down
Lid stays open and
will not close
Lid opens and
closes constantly
Lights are on but
there is no power
Check the batteries are inserted correctly and are in the correct position.
Check the batteries are inserted correctly and haven’t fallen out of place.
The motor is broken, a new lid is required.
The lid has been forced open and/or closed, a new lid is required.
Rubbish or object is too close to the lid and is triggering the sensor.
Kitchen counter or shelf is directly above the sensor.
A person walked by and was too close to the sensor.
Intense fluorescent lights are directly above the sensor.
Turn the bin OFF and ON again using the button at the back of the bin.
Clean the sensor area with a dry, clean cloth.
Clean the sensor area with a dry, clean cloth.
Check nothing is blocking the lid before trying to close.
Reset the sensor by turning off the bin and taking the batteries out for 24 hours.
Reset the sensor by turning off the bin and taking the batteries out for 24 hours.
Replace the batteries.
Reason / Solution Fault
1.
2.
3.
Turn off and remove the lid.
Wipe inside the lid with a clean dry cloth or an antibacterial wipe, ensure the lid is dried
afterword’s if using an antibacterial wipe.
Wipe the inside and outside of the bin with a clean, damp cloth.
Cleaning